 Used to test the resistance of a coating of paint, varnish or related product to cracking or detachment from a metal panel, after the panel has been bent around a cylindrical mandrel. It can be used as a simple Pass/Fail test at a known diameter, or as a Point of Failure test, by using successively smaller mandrels until cracking is observed.
Accepts panels up to 50mm wide and 1mm thick.
The following stainless steel mandrels are supplied:
2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 25, 32mm diameters.
Complies with BS3900: E1 ISO1519; DIN53152;
NFT 30-040; SIS 184174.
Mandrel diameters, 1/8? 1/4? 3/8? 1/2? 3/4? 1? complies
with ASTM-D522.
Download datasheet (PDF, approx 635KB)
For more information about this product contact Sheen
Get a quotation |
 |
809 |
Cylindrical Mandrel Bend Tester |
 |
|
809A |
Cylindrical Mandrel Bend Tester to ASTM D522 |
|
|
| |
|
