Drying Time
Drying Time Recorder
Features
- 3 standard models available:
- BK3: 6 tracks, 3 selectable speeds: 6, 12 or 24 h.
- BK6: 6 tracks, each pair of tracks is driven by an
Independent motor, this allows different test start times.
1 speed: 12 h.
- BK10: 10 tracks, same as BK6, 1 speed: 12 h.
- Special speed combinations with 6, 12, 24, and 48 h.
also possible, to be specified when ordering
- Optional 6 x 5 g. brass weights to increase test pressure
- Simple maintenance & easy to clean
- Standard delivery: recorder, set of 6 (or 10) needles,
pack of 6 (10) glass strips
- 240 V/50 Hz or 110 V/60 Hz*
For more information about this product contact Sheen |
|
| |
Introduction |
 |
A reliable apparatus to test the drying time or gelation behaviour of many paints and coatings, applied onto a glass strip of 300 x 25 mm (12” x 1”) by means of our cube applicator. Hemispherical needles travel on these test tracks, over a selected time: 6, 12 or 24 h. The drying time stages can be easily assessed with the graduation scale (according to traverse speed configuration):
1. Evaporation of solvent: deep pear-shaped impression
2. Sol-gel transition: continuous track
3. Surface dry: interrupted track
4. Final dry time, the needle no longer penetrates the film
Get a quotation |
|
BK3 |
Drying Time Recorder |
 |
|
BK3 SV |
Drying Time Recorder, any other motor |
|
|
BK6 |
Drying Time Recorder |
|
|
BK6 SV |
Drying Time Recorder, any other motor |
|
|
BK10 |
Drying Time Recorder |
|
|
BK10 SV |
Drying Time Recorder, any other motor |
|
|
1103 |
Standard 25mm cube applicator,
gap sizes 37 & 75μm |
|
|
BK/CG |
Castor guide |
|
|
BK3/BW |
Set of 6 x 5 g. brass weights |
|
|
BK/GS |
Additional glass strips (pack of 12) |
|
|
| |
|
|
